FYH UCFL201-8E Bearing units

D:90 mm; Dynamic load, C:28.3 kN; rs min:1.1 mm; ra max:1 mm; Nlim (grease):7,700 rpm; da min:61.5 mm; f0:15.3; Fatigue limit load, Cu:0.96 kN; Max operating temperature, Tmax:120 °C; Mass:0.39 kg;

Holder Surface Treatment:Not Provided; Shape:T-Shaped; Housing Material:304 Stainless Steel; Shape:T-Shaped; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Seals:ZZ (Double Shield); Height H(inch):2 1/2; Days to Ship:14 Days; Seals:ZZ (Double Shield);

Inner/Outer Ring Material:Steel; Type:Ball; RoHS:6; D:62; Rolling Element Material:Steel; Types:16**/6*** series; Basic Dynamic Load Rating(N):2120; Number of Raceway Ring Rows:Single Row; Holder Symbol:L1; Type:Ball;

Load Direction:Radial; Spacer, Sleeve symbol:No; Outer Ring:With Outer Ring; Torque Symbol:No; Internal Symbol:No; Type:Ball; Width(mm):10; RoHS:6; Holder Symbol:No; Specifications, Environment:Standard;

Symbol of Bearing Ring Shape:No; Retainer Type:Momi removing; Days to Ship:Quote; Holder Symbol:M; Low Torque Specification:No; Special Configurations Code:No; Inner/Outer Ring Material:Steel; Load Direction:Radial; Seal, Shield Symbols:No; Bearing Ring Type:N Shape;

Outer Ring:With Outer Ring; Outer Ring Shape:Flat; O.D.(Ø):200; Rolling Element Material:[Steel] Steel; Type:Angular Contact Ball; Size Standards:Metric System; Preload:No; Symbol of Bearing Ring Shape:No; Precision Grade Symbol:No; Combination symbol:DB;

Recommended tightening torque for set screw:8 Nm; s1:20.6 mm; L1:42 mm; B:41.2 mm; H1:13 mm; T min.:-20 °C; Z:70.2 mm; T max.:200 °C; d:44.45 mm; G:M6x1;

Radius:1.5 mm; d:140 mm; D:200 mm; B:25 mm; Da:178 mm; Static Load Rating:120.6 kN; Dynamic Load Rating:69.5 kN; Oil Holes:2.5 mm; da:161 mm;

Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Flange Shape:Compact Type; Width T(mm):20 ～ 40; Holder Surface Treatment:Clear Anodize; Flange O.D. H(φ):38; Days to Ship:7 Days; Bearing I.D. d(mm):5; Type:Bearings with Housin;

Recommended tightening torque for set screw:5.5 Nm; A:15 mm; Weight:0.34 kg; Designation of housing:FD203G-; d:12 mm; B:19.1 mm; L:58.7 mm; J:63.5 mm; C0:4.78 kN; T max.:200 °C;

Max. Allowed rpm(rpm):550; Outer Ring Shape:Flat; Specifications/Environment:Standard; Size Standards:Metric System; Number of Raceway Ring Rows:Single Row; Load Direction:Thrust; Number of Raceway Ring Rows:Single Row; Type:Thrust Ball; Inner/Outer Ring Material:Steel; Size Standards:Metric System;

Precision:Grade 0; Retainer Type:Punching; D:62; Type:Ball; Max. Allowed rpm(rpm):11000; Specifications/Environment:Standard; Types:16**/6*** series; Basic Dynamic Load Rating(N):12200; Bearing Style:Rubber Sealed; B:12;

Preload Mark:C3; Low Torque Specification:No; Combination symbol:No; B:16; I.D.(Ø):30; Bearing Style:Open Type; Special Configurations Code:No; Retainer Type:No; Acoustic Symbol:No; Internal Symbol:No;

H:110 mm; Weight:1.71 kg; S:19 mm; C0:19.2 kN; Designation of bearing:UC307-22G2L3; C:33.5 kN; T min.:-20 °C; SW:3.97 mm; Designation of housing:C307-; d:34.92 mm;

Holder Symbol:No; Bearing Style:Double Shielded; Symbol of contact angle:B; Inner/Outer Ring Material:[Steel] Steel; Preload Mark:No; I.D.(Ø):12; Width(mm):8; Contact angle(Degree):40; Material Symbol:No; Outer Ring:With Outer Ring;